Перейти к информации о продукте
1 из 6

Lishi 2-in-1 M1/MS2 для Master Lock 4-Pin — Padlocks пик и декодер

Lishi 2-in-1 M1/MS2 для Master Lock 4-Pin — Padlocks пик и декодер

M1/MS2SKU: AQLM0014In stock — ready to ship
Dispatched within 48 hours
30-day return window
Genuine Lishi tool
Specification in the listing
Обычная цена $37.99 USD
Обычная цена $58.99 USD Цена со скидкой $37.99 USD
Распродажа Продано

Ships in 7–12 business days · $10 flat rate worldwide, tracking on every order

30-day returns · unused items in original packaging

Import duties or VAT, if charged by your country, are payable on delivery.

Buy any 2 tools → 12% off applied automatically at checkoutSee all Другие жилые замки →

Compatibility check

Confirm the vehicle make, model year, market and lock position, then match the keyway code in the title. Each tool is built for one keyway — two vehicles of the same brand can need different tools.

Shipping & Returns

Dispatched within 48 hours; delivery typically takes 7–12 business days with tracking. Flat rate $10 worldwide. Unused items can be returned within 30 days — see Shipping and Returns.

Support before you order

Not sure which tool fits? Contact us before you order and we will check the listing with you.

Просмотреть всю информацию

Fitment check

Not sure this tool fits your vehicle?

Ask the assistant: it checks this listing against your make, model, year and market, and tells you when it cannot confirm.

Master Lock padlocks are everywhere — job boxes, gates, storage units, school lockers, shed hasps. The M1/MS2 is the Lishi 2-in-1 built for that keyway: it picks the padlock and reads the four pin depths in one pass, so a cut padlock becomes a cut key.

This is the tool for the "I lost the key to my garage padlock" call. Because it decodes as it picks, you leave with a working key rather than a lock you have to drill and replace.

Which locks this tool fits

  • Keyway — M1 / MS2. The standard 4-pin Master Lock padlock keyway used on laminated and solid-body padlocks, and on many Master Lock-branded cam locks.
  • Cut count — 4. Master Lock also uses other keyways on its higher-security lines; if the keyway stamp is not M1/MS2, this is not the tool.
  • Format — padlock. Designed around the smaller plug and shackle body of a padlock rather than a door cylinder.

Confirm the keyway from the key itself. Padlock keyways are short and easy to misread on a photo, so compare the blade profile before ordering.

What "2-in-1" actually means

The M1/MS2 combines a pick and a decoder in one body. Tension the plug, lift each pin to the shear line, and read its depth off the scale as it sets. You end up with the padlock open and a full four-depth reading you can cut a key from — no second visit, no drilled lock.

Decode-then-cut workflow

  1. Check the keyway. M1/MS2 on the key or plug face. If it is an American Lock keyway, use the AM5 instead.
  2. Tension and insert. Light turning pressure, then feed the tool along the keyway.
  3. Set and read each pin. Record all four depths as they set — padlock plugs are short, so work slowly.
  4. Cut the key. Cut on the recorded depths with a key machine or the factory cutter pliers.
  5. Test the key in the padlock and leave it with the customer.

Three mistakes that cost the most

  • Confusing Master Lock with American Lock. Both say "padlock" on the listing; they are different keyways and different tools.
  • Forcing the tension. Padlock plugs bind quickly. If the pins stop moving, back the tension off before you bend a pick.
  • Not recording depths as you go. The plugs are small and easy to re-pick — but if you did not write the numbers down, the decode is wasted.

Frequently asked questions

Will it work on a Master Lock with a 5-pin keyway?

No. The M1/MS2 is a four-pin tool. Count the cuts on the key; a five-cut Master Lock keyway needs a different model.

Does the padlock have to come off the hasp?

It is much easier with the padlock in hand or hanging free. Working against a fixed hasp limits your angle and makes tension control harder.

Can I cut a key from the decoded depths?

Yes. Use the correct M1/MS2 blank and a key machine or cutter pliers.

Related tools

For heavier padlocks, add the AM5. For door cylinders on the same jobs, keep the SC1 and KW1 in the same pouch.

Buying guide & support

Ordering, Shipping and Aftercare

Buying the right tool

Match the keyway code in the title to the vehicle or lock you are working on. The cut number (5-cut, 8-cut, 10-cut) describes the bitting geometry, not tool quality.

Read the buying guide

Shipping

Orders are dispatched within 48 hours. Delivery typically takes 7–12 business days depending on destination, with tracking provided for every shipment.

Shipping information

Returns

Return unused items in original packaging within 30 days of delivery. Refunds are issued to the original payment method within 3–7 business days of inspection.

Return & refund policy

The product title states the keyway and the vehicle families it is built for. Because one brand can use several keyways across model years, confirm year, market and lock position before ordering — contact us if you are unsure.

Package contents are listed in the “In the box” section when the supplier provides them. Tools are supplied in the manufacturer’s packaging with the decoding card where applicable.

Yes. We ship worldwide with tracked courier services. Shipping options and costs are shown at checkout once your address is entered.