Видеоуроки

Watch a Lishi 2-in-1 pick and decoder work a real lock on the bench — no staging. In 80 seconds you can see the tension, the pin-by-pin lift and the depth read that separates a Lishi from an ordinary pick set. The tool in the clip is the HU101, the 10-cut Ford and Jaguar keyway.

Lishi 2-in-1 in use

HU101 picking a Ford lock · 1:20 · filmed on our own bench

At a glance

Keyway
HU101 · 10-cut
Side milling, two tracks
Works on
Ignition · Door · Trunk
One tool, three lock positions
Decode
All 10 positions
Cut a key on site, no tow
Body
182.5 g
Stainless steel, anti-glare scale

Why locksmiths keep an HU101 in the bag

  • It decodes as well as it picks. The tool reads all ten positions off the scale as the pins set, so you record the bitting on the vehicle and cut the key on the bench. No guessing, no second visit.
  • One tool covers three lock positions. Ignition, door and trunk on the same keyway — you are not buying three tools for one car.
  • It is the first Ford Lishi most people buy. A large share of modern Ford locks from the last two decades run on HU101; you add FO38 later for the older eight-cut cars.
  • The scale stays readable. Anti-glare stainless body, markings engraved rather than printed — the depths are still legible in a dim footwell.

Vehicles it covers

Look for HU101 stamped on the key head or the cylinder face — do not guess from the badge. The tool is listed for these applications:

Brand Typical coverage Watch out for
Ford Modern Ford ignition, door and trunk locks on the 10-cut keyway Eight-cut Ford keys are not HU101 — those are FO38 or another family
Jaguar Models sharing the Ford-era 10-cut keyway Confirm the keyway stamp before ordering
Land Rover Listed applications on the same keyway Some Land Rover locks use HU92 — check the key first
Mustang Listed applications on the same keyway Generation matters; Ford changed keyways across years

Which Ford tool is which

These four tools look similar and are not interchangeable. This is the table to check before you order or before you open the door:

Tool Keyway Typical use
HU101 (the tool in the video) 10-cut Modern Ford, Jaguar, Land Rover, Mustang
FO38 8-cut Older Ford ignition and door locks
HU198 / FORD2017 10-cut 2018+ Focus and newer Ford applications
FORD2021 8-cut Ford New Century, New Transit, Leopard CS10

What the video is showing you

  • Tension first. Light, constant turning pressure — enough to feel the pin set, not enough to bind the plug.
  • Read the scale. The decoded depths come off the marks on the tool body, not from memory or a guess.
  • One pass. The same tool picks and decodes; there is no separate reading step and no second tool change.

How the decode runs, step by step

  1. Confirm the keyway. HU101 on the key or cylinder. If the key has eight cuts, stop — you want FO38 or another tool.
  2. Insert into the lock you need. Ignition, door or trunk: the same body covers all three positions.
  3. Tension and lift each of the ten pins. Read the depth off the scale as each pin sets, and write it down.
  4. Record all ten positions before you pull the tool out. Then cut and test the key on a key machine or with the factory cutter pliers.
Check these two things before you buy
  • Cut count. HU101 is a ten-cut keyway. An eight-cut Ford key is a different tool, full stop.
  • Vehicle generation. Ford changed keyways over the years. HU101, FO38, HU198/FORD2017 and FORD2021 are not interchangeable.

Get the tool from this video

The HU101 comes as a single 2-in-1 pick and decoder in a stainless body, with the scale engraved on both faces. If you are building a Ford kit, the usual next step is FO38 for the older cars.

View the Lishi HU101 → All Ford tools

Common questions

Will HU101 work on my Ford?

Only if the car uses the ten-cut HU101 keyway. Check the key: ten cuts point to HU101, eight cuts usually mean FO38 or another family. When in doubt, send us a photo of the key and the cylinder.

Can I decode with the same tool, or do I need a second one?

The same tool picks and decodes. You lift each pin, read the depth off the scale, and record all ten positions before removing the tool — that is what lets you cut a key without a second visit.

Does it cover the trunk as well as the ignition?

Yes. Ignition, door and trunk locks are all listed for the HU101 keyway, which is why it replaces three separate picks on most jobs.

Keep going

Download the manuals and compatibility charts for the model you own, or use the tool finder to confirm the keyway for a specific vehicle.

Buying in volume? Orders of 20+ Lishi 2-in-1 tools or a 32-piece set include a free online training session with our technical team.