Lishi HY22 vs HY15 vs HY20R vs HYN11: Hyundai & Kia
Hyundai and Kia share platforms, but they do not share one Lishi keyway. The four tools most often compared here use three different cut counts: HY22 is six-cut, HY15 is ten-cut, and HY20R and HYN11 v.3 are both eight-cut.
That last point is the trap. Two eight-cut tools do not cover the same locks, because one is a door tool and the other is an ignition tool.
The four tools at a glance
| Tool | Cuts | Position | Listed for | Milling |
|---|---|---|---|---|
| HY22 | 6 | Ignition, door, trunk | ix35, New Sportage, i30, Accent | Internal, four tracks |
| HY15 v.3 | 10 | Ignition, door, trunk | Veracruz, Santa Fe, Veloster, K2, K4 | Flat, two tracks |
| HY20R | 8 | Door | Korean Hyundai and Kia | Internal, two tracks |
| HYN11 v.3 | 8 | Ignition | Elantra, Cerato, Tucson | Flat, two tracks |
Weights are spread widely: 181.9 g for the HY22, 91.2 g for the HY15 v.3, 186.1 g for the HY20R and 86.7 g for the HYN11 v.3. Published IC cards are 824, 1098/1770, 1372 and 8 respectively.
HY22: the six-cut multi-position tool
The HY22 is a six-cut tool covering ignition, door and trunk on examples such as ix35, New Sportage, i30 and Accent. It uses internal milling with four tracks, a 1–6 space, weighs 181.9 g and publishes IC card 824.
It is the only six-cut tool in this group, and one of only two listed for all three positions.
HY15: the ten-cut multi-position tool
The HY15 v.3 is a ten-cut tool covering ignition, door and trunk on examples such as Veracruz, Santa Fe, Rianna, New Coupe, Veloster, K2 and K4. It uses flat milling with two tracks, a 1–10 space, weighs 91.2 g and publishes IC cards 1098/1770.
Ten cuts is a big jump from six or eight. If the key has ten positions, neither HY22 nor HY20R will read it.
HY20R: the eight-cut door tool
The HY20R is an eight-cut door tool listed for Korean Hyundai and Kia. It uses internal milling with two tracks, a 1–8 space, weighs 186.1 g and publishes IC card 1372.
It is a door tool. The fact that it is eight-cut does not make it an ignition tool.
HYN11 v.3: the eight-cut ignition tool
The HYN11 v.3 is an eight-cut ignition tool listed for Elantra, Cerato and Tucson. It uses flat milling with two tracks, a 1–8 space, weighs 86.7 g and publishes IC card 8.
There is also an earlier HYN11 v.2 listing for door and trunk locks. Version and position both matter; do not treat the two HYN11 listings as interchangeable.
The 8-cut trap: four listings, one cut count
Eight-cut Hyundai and Kia tools appear under several names: HY20R (door), HYN11 v.3 (ignition), HYN11 v.2 (door/trunk), K5 v.3 (ignition for Yerna and new K5), and Kia-specific door tools such as KIA3R and KIA2018.
They are not alternates for the same lock. The cut count narrows the field; the position and the model decide the tool.
How to choose in four steps
- Count the cuts. Six, eight or ten.
- Identify the position. Door only, ignition only, or all three.
- Identify the model. Hyundai and Kia listings overlap, but the named examples differ.
- Confirm the keyway stamp on the key or cylinder before ordering.
Common mistakes
- Ordering HY20R for an ignition lock. It is listed for door locks; HYN11 v.3 is the ignition branch.
- Assuming all Hyundai and Kia keys are six-cut. HY15 is ten-cut.
- Treating HYN11 v.2 and v.3 as the same tool. They are separate listings with different positions.
- Using a Kia door tool on a Hyundai. Check the named coverage before assuming.
A note on coverage lists
The vehicle examples on these pages are a shortlist, not a model-year guarantee. Hyundai and Kia changed keyways across generations and markets. Use the cut count and position to narrow the choice, then confirm on the vehicle. If the listing and the vehicle disagree, the vehicle wins.
Why the weights differ so much
The HY22 (181.9 g) and HY20R (186.1 g) are internal-milling tools with larger bodies; the HY15 v.3 (91.2 g) and HYN11 v.3 (86.7 g) are flat-milling tools with smaller bodies. The difference is a design consequence, not a quality signal. Do not choose a tool by weight alone.
What the IC card numbers tell you
The published cards are 824 for the HY22, 1098/1770 for the HY15 v.3, 1372 for the HY20R and 8 for the HYN11 v.3. The card number identifies the reference set that ships with the tool; it is not the keyway code and not the model number. If you are matching a card to a tool, start from the model code on the body.
Frequently asked questions
Which tool covers a Hyundai ignition lock?
HYN11 v.3 is the eight-cut ignition listing in this group. HY22 and HY15 are also listed for ignition, but with different cut counts.
Is HY15 really ten-cut?
Yes, the listing is 10-cut with a 1–10 tool space and flat milling with two tracks.
Can HY20R open a trunk?
The listing is for door locks. Do not assume trunk coverage.
What is the difference between HYN11 v.2 and v.3?
The v.3 is an eight-cut ignition tool; the v.2 is listed for door and trunk locks.
Does one tool cover Hyundai and Kia?
Several listings name both brands, but the coverage examples differ. Confirm the vehicle and keyway.
Still not sure which Hyundai or Kia tool?
Use the tool finder to narrow the keyway, then compare the listings. For the broader selection logic, read Which Lishi tool do I need, and browse the Asian vehicle collection to see the keyways we stock.

