Lishi SC1 2-w-1 Pick & Decoder do zamków Schlage 5-pin
Lishi SC1 2-w-1 Pick & Decoder do zamków Schlage 5-pin
Nie można załadować gotowości do odbioru
Compatibility check
Compatibility check
Confirm the vehicle make, model year, market and lock position, then match the keyway code in the title. Each tool is built for one keyway — two vehicles of the same brand can need different tools.
Support before you order
Support before you order
Not sure which tool fits? Contact us before you order and we will check the listing with you.
Fitment check
Not sure this tool fits your vehicle?
Ask the assistant: it checks this listing against your make, model, year and market, and tells you when it cannot confirm.
Schlage SC1 is the keyway behind most residential Schlage deadbolts, entry knobs and lever sets in North America, which is why the SC1 is usually the first Schlage 2-in-1 tool a locksmith adds to the bag. This is the standard 5-cut version: it picks the cylinder and reads the five pin depths in a single pass, without taking the lock off the door.
Lost-key calls, rekeys after a move, and lockouts on a standard Schlage cylinder all start here. The tool follows the keyway stamped on the key head or cylinder face, so confirm that stamp before ordering — Schlage also uses the SC4, SC20 and Everest keyways, and they look almost identical in a product photo.
Which locks this tool fits
- Keyway — SC1. Five-pin Schlage residential cylinders: deadbolts, entry knobs, levers, and the replacement SC1 cylinders sold at hardware stores.
- Cut count — 5. A six-cut Schlage key belongs to the SC4 or SC20 keyway, not this tool.
- Groove side — standard. The reverse-handing version is the SC1-L. A standard-groove tool will not read a left-groove cylinder correctly.
The application is not the deciding factor. SC1 cylinders also turn up on mailbox locks, cabinet locks and storage-room doors, and the same tool works on them — as long as the keyway is SC1.
What "2-in-1" actually means
A Lishi 2-in-1 is a pick and a decoder in one body. You tension the plug, lift each pin to the shear line, and read its depth off the scale as it sets. You finish with an open lock and a complete depth reading you can cut a working key from. A pick set gets you in; a decoder gets you a key.
Decode-then-cut workflow
- Confirm the keyway. SC1 stamped on the key or cylinder face. Not sure? Send a photo through the tool finder first.
- Insert and tension. Slide the tool down the keyway and apply light turning pressure — enough to keep the pins from dropping, not enough to bind them.
- Lift and read. Work front to back, recording each depth as the pin sets. Note all five positions before you pull the tool out.
- Cut the key. Take the depths to a key machine or the factory cutter pliers.
- Test and record. Try the new key in the cylinder, then log the depths for the next visit to that address.
Three mistakes that cost the most
- Buying SC4 for a 5-pin door. Count the cuts on the key first. Five cuts means SC1; six means SC4 or SC20.
- Ignoring groove direction. SC1 and SC1-L are different tools, and the difference is the most common return reason on Schlage 2-in-1s.
- Assuming "Schlage" means SC1. Everest (S123/C123) and SC20 are separate keyways with their own tools.
Frequently asked questions
Will the SC1 open every Schlage lock?
It opens SC1-keyway cylinders. Schlage residential locks also ship on SC4, SC20 and Everest keyways, so check the stamp on the key or plug face before you buy.
Can I cut a key from the decoded depths?
Yes — that is the point of a decoder. You need the correct SC1 blank and access to a key machine or cutter pliers.
Is it hard to learn?
SC1 is one of the friendlier Lishi tools: an open keyway and only five pins. The learning curve is in tension control and reading the scale, not in the mechanism.
Related tools
Pair the SC1 with the KW1 for Kwikset cylinders and the M1/MS2 for Master Lock padlocks to cover most residential work.
Buying guide & support
Ordering, Shipping and Aftercare
Buying the right tool
Match the keyway code in the title to the vehicle or lock you are working on. The cut number (5-cut, 8-cut, 10-cut) describes the bitting geometry, not tool quality.
Shipping
Orders are dispatched within 48 hours. Delivery typically takes 3–7 business days depending on destination, with tracking provided for every shipment.
Returns
Return unused items in original packaging within 30 days of delivery. Refunds are issued to the original payment method within 3–7 business days of inspection.
The product title states the keyway and the vehicle families it is built for. Because one brand can use several keyways across model years, confirm year, market and lock position before ordering — contact us if you are unsure.
Package contents are listed in the “In the box” section when the supplier provides them. Tools are supplied in the manufacturer’s packaging with the decoding card where applicable.
Yes. We ship worldwide with tracked courier services. Shipping options and costs are shown at checkout once your address is entered.
Keep browsing
Related Tools
Other tools locksmiths buy alongside this one.
-
-
-
Lishi SC4-L 2-w-1 Pick & Decoder do zamków Schlage 6-pin (lewostronny · Lishi 2-in-1Lishi SC4-L 2-w-1 Pick & Decoder do zamków Schlage 6-pin (lewostronny)
$42.89 In stock -
